A pan handle is the grip on frying pans and skillets. Two pans of the same diameter can still need different handles, because length, hole spacing and angle are set by the pan drawing rather than by a standard size.
Fit the pan, not the shelf
Four measurements decide whether a handle fits: overall length from the pan wall to the grip end, hole spacing and hole diameter at the mounting flange, the angle between the handle axis and the pan wall, and the grip diameter where the hand closes. Get those right and the handle sits flush; guess them and the pan rocks, the lid fouls, or the flange cracks.
- Length is measured from the pan wall to the end of the grip, not from the flange.
- Hole spacing and diameter must match the pan’s existing rivet or screw pattern.
- Angle is taken from the same drawing as the length.
- Grip diameter sets how the handle feels when the pan is full.
What to measure
Send these six values with your pan drawing and the handle can be quoted without a back-and-forth.
| Attribute | What we need |
|---|---|
| Material | Heat-resistant phenolic (Bakelite) |
| Fit | Frying pans, skillets |
| Length | Pan wall to grip end, per drawing |
| Hole pattern | Spacing and diameter of rivet or screw holes |
| Angle | Handle axis to pan wall, per drawing |
| Grip diameter | Measured where the hand closes |
| Finish | Matte, glossy, wood-grain or water-transfer |
Material choice
Phenolic (Bakelite) is the usual choice for frying pans because it transfers little heat and can be molded to any profile or color. Stainless tube handles suit oven-heavy ranges, and silicone-wrapped handles suit short induction pans. We mold the phenolic type to your drawing; the fit measurements above apply to any material.
Frequently asked questions
Q: Can you copy the handle we already use?
A: Send a drawing or a sample. We measure length, hole pattern, angle and grip diameter, then build the mold to those numbers so the part sits flush.
Q: Does the handle material affect the fit?
A: No. Fit comes from the four measurements; material only changes heat transfer, weight and finish.
Q: Does it stay cool while frying?
A: Bakelite transfers little heat, so the grip stays comfortable through normal frying.
Request a quote
Send your pan drawing or a sample handle to sales@bshouseware.com. We measure the part, mold it to those numbers, and production is confirmed from that sample.












